Vite Levelling System Kit 1.5mm  Levelling system made up of cap and clips.
• Insert the cap in the clip threat and with just to fingers twist it down by acting on the grip point: it
reaches the tile in a second (“spinning top” effect). Then tight the cap so to level the tiles (remove
lippages).
• Once the adhesive is set, remove the cap by beating it with a white rubber mallet (or with the foot).
Beat parallel to the joint line. As an alternative, unscrew the cap, remove it and beat directly on the
clip (parallel to the joint line).
• The cap is designed to provide maximum ergonomics and finger grips both for starting cap rotation
on the clip and for applying the necessary force for levelling tiles (lippage removal) with ease.
• The cap hollow-design allows the user to see the grout joint. This makes it suitable to be use both
on tiles sides and intersections.
• Wide range of clips for joints of 1 – 1,5 – 2 and 3 mm (1/32”; 1/16”; 5/64”; 1/8”).
• 1,5 mm and 3 mm clips (1/16” and 1/8”) are available in models: FLAT (standard) for use along tile
sides; CROSS (+) for use into tile intersections in + layout; “T” for use into tile intersections in T
layout.
• 1 mm (1/32”) clips available in two versions: for tiles thickness from 3 to 15 mm (1/8”-19/32”) for tiles
thickness from 14 to 26 mm (9/16”- 1”). This is ideal also for natural stones installation.
• The cap works on both clips.
• Self-stopping scratch-preventing washer with rubber ring and VITEXPRESS available as accessories.