Maxisil A – Ceramic Silicone is designed especially for expansion joints for use in all sanitary areas, ceramic tiles in bathrooms, kitchens and flooring sectors.
*Please note that colour samples are not true to the actual colour. This is a guide only. Maxisil A – Ceramic Silicone
Maxisil A Ceramic Silicone
- Can be used for interior and exterior areas
- Built in fungicides for mould resistance and can be used for both exterior and interior areas
- Excellent weather ability, resistant to ageing, UV radiation and is resistant to chemicals and temperature
- Primerless adhesion to clean, dry surfaces such as ceramics, glass, acrylics, aluminium, painted wood with very good tooling and smoothing properties
- Maxisil A Ceramic Silicone is an acid cure silicone recommended for all ceramic tiled areas
- Time saving with easy cleanup system
| DEPTH OF JOINT | WIDTH OF JOINT | ||||||
| 5mm | 7mm | 10mm | 12mm | 15mm | 21mm | 25mm | |
| 5mm | 12.0* | 8.0* | 6.0* | ||||
| 7mm | 6.0* | 4.0* | 3.0* | ||||
| 10mm | 3.0* | 2.5* | 2.0* | 1.5* | |||
| 12mm | 2.1* | 1.7* | 1.2* | 1.0* | |||
| 15mm | 1.3* | 1.0* | 0.8* | ||||
*Metres per 300/310ml cartridge
Note: These values are approximate and serve as a rough guide for right-angled joints. The depth of the joints is measured to the rear of the profile.
The authorised dimensions of the joints are governed by DIN 18540. Accordingly all exterior expansion and connection joints must have a minimum width of 10mm and a maximum width of 35mm. Up to a width of 15mm the depth of the joint should correspond to the width. If the width of the joint exceeds 15mm, then the depth should be approx 2/3 of its width.

















