Lithofin PRO MPP (Marble Polishing Powder) (Oxalic acid based) for restoring dull areas and renewing the natural polish of calcium-containing natural stone i.e. marble, limestone, etc. Can be machine-polished to high gloss. Not suitable for granite, gneiss and similar hard stones. Lithofin PRO MPP (Marble Polishing Powder)
A special LITHOFIN-Product formulated for the professional user. Lithofin MPP is a polishing powder based on oxalates and special additives.
Lithofin MPP transforms calcium particles in the surface of the stone, making them easy to polish. The polish is renewed and the surface once again has a high gloss finish.
Apparent Density: 0.85 g/cm³
pH-Value n.a. in Water: < 2
Appearance: powder, white
Flash Point: n.a.
Field of Use
For touching up dull patches and for renewing worn off polishes on marble, travertine and other calcium containing stones. Not suitable for granite, quartzite, artificial stone, etc.
The surface to be treated must be clean and free of polymers, acrylates and wax layers. Use Lithofin MN Power-Clean or Lithofin WAX-OFF to thoroughly clean the surface. For touching up small surfaces or patches it is possible to polish by hand. This will only lead to a lower level of gloss; it is preferable to use a polishing machine. On smaller surfaces we recommend polishing machines with approx. 1000 rpm. For floors, a one disc polishing machine with approx. 140 to 180 rpm, 40 to 50 kg, pressure of approx. 0,37 N/cm² to 0,52 N/cm² is necessary. Always use a white nylon polishing pad. Optimal results can be achieved on surfaces with a 300 to 400 polish. Treat larger surfaces in segments of approx. 10 to 15m².
Wet the surface with plenty of water. Spread a small quantity of Lithofin MPP and immediately start polishing. When the product turns pasty, add some water and continue polishing until the desired gloss level is reached. Then immediately rinse the surface with Lithofin MN Power-Clean diluted 1:10 to 1:20, then remove the solution with a wet and dry vac or cloth. Do not allow any product residues to remain on the surface.
Advice: it may be advisable to wet the surface with Lithofin MN Power-Clean rather than with water. This reduces the risk of Matt stains due to splashes on already polished surfaces. On small areas, Lithofin MPP can be mixed with Lithofin MN Power Clean to form a paste, which is easier to use.
Please Note: sensitive surfaces such as wood, parquet, carpets, etc. must be protected against splashes. Some types of stone difficult to polish. Always try the product in an inconspicuous area prior to use. Deep scratches can not be removed.
Coverage: approx. 30m² per 750g.
Application Temperature: the temperature of the surface should be between 10°C and 25°C. Switch off under floor heating.
Keep closed and cool. Shelf life of up to five years.
Acids are largely neutralized during treatment.
Disposal: product residues are classified as special waste. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system.
The product may only be sold and used by trained
Contents: oxalic acid (>60%).
Labelling according to EU-Regulations 1999/45/EG: Xn, harmful.
Risk and Safety Phrases: harmful in contact with skin and if swallowed. Keep out of the reach of children. Avoid contact with skin and eyes. Do not inhale. Wear suitable protective clothing, gloves and eye/face protection. If swallowed, seek medical advice immediately and show this container or label.
First Aid Procedures: remove contaminated soaked clothing immediately. In case of inhalation, ensure of fresh air. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.
Emergency Procedures: in case of spill or other release, take up mechanically. Ensure adequate ventilation. Ensure adequate ventilation. Use personal protective clothing. In case of fire formation of dangerous gases possible. Suitable extinguishing material: foam, dry powder, carbon dioxide, sand
750g bottle with child-proof cap (12 per box)