Lithofin MN Power Clean

$1.00

Lithofin MN Power Clean

For thorough cleaning in case of severe general and greasy dirt, residues of floor care products, etc. For regular cleaning of high-traffic and outdoor areas such as shopping centres and food courts. For final cleaning of new surfaces at building sites. This product is recommended for all types of natural stone, but especially for polished marble and limestone.

Description
A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Power-Clean is free of solvents, low in odour and economical in use. It is a mildly alkaline cleaner, which contains a balanced mixture of cleaning components which guarantee optimal performance.
Properties
This special cleaner is nearly odourless and highly economic. Lithofin MN Power-Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc.
Technical Data:
Density: approx. 1.0 g/cm³
pH-Value: approx. 10
Appearance: liquid, colourless, clear
Odour: pleasant
Flash Point: n.a.
Solubility in Water: complete
Field of Use
For thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones.
Facilitates removing cement residues from polished marble. Suitable for indoor and outdoor use.
Directions for Use
Apply and evenly distribute Lithofin MN Power-Clean diluted up to 1:10 and wipe the surface. In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and brushing more vigorously.
Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. Always test the product in an inconspicuous area prior to use.
Coverage:
as supplied: approx. 5 to 10m² depending on dirt diluted: up to 30m²
Advice: for removing wax layers and the like, we recommend Lithofin WAX-OFF.
For cement residues and rust discolorations on granite, gneiss and similar acid resistant stones, use Lithofin MN Builders’ Clean.
Storage
Keep closed, cool and dry. Not above 25°C.
Shelf life of up to 3 years.
Environmental Protection
Surfactants are biologically degradable in accordance with EU-regulations. Free of phosphates.
Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.
Safety
Ingredients: < 5 % non-ionic and < 5% cationic surfactants, scent (geraniol).
Labeling according to VO(EG) Nr.1272/2008(CLP): Symbol GHS05, Danger
Propylheptanolethoxilate, quaternary C12-14 alkylmethylaminethoxylatmethylchloride
Concentrate causes serious eye damage. Keep out of reach of children. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.
Additional information is listed on the Material Safety Data Sheet.
Packaging
a) 500ml bottle with child-proof cap (10 per box)
b) 1 litre bottle with child-proof cap (12 per box)
c) 5 litre canister (4 per box)

Lithofin MN Power Clean

Facebook
Instagram
Email
Twitter
SKU LFMPWRCLN*SIZE Categories ,

Lithofin MN Power Clean For thorough cleaning in case of severe general and greasy dirt, residues of floor care products, etc. For regular cleaning of high-traffic and outdoor areas such as shopping centres and food courts. For final cleaning of new surfaces at building sites. This product is recommended for all types of natural stone, but especially for polished marble and limestone.

Description
A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Power-Clean is free of solvents, low in odour and economical in use. It is a mildly alkaline cleaner, which contains a balanced mixture of cleaning components which guarantee optimal performance.
Properties
This special cleaner is nearly odourless and highly economic. Lithofin MN Power-Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc.
Technical Data:
Density: approx. 1.0 g/cm³
pH-Value: approx. 10
Appearance: liquid, colourless, clear
Odour: pleasant
Flash Point: n.a.
Solubility in Water: complete
Field of Use
For thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones.
Facilitates removing cement residues from polished marble. Suitable for indoor and outdoor use.
Directions for Use
Apply and evenly distribute Lithofin MN Power-Clean diluted up to 1:10 and wipe the surface. In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and brushing more vigorously.
Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. Always test the product in an inconspicuous area prior to use.
Coverage:
as supplied: approx. 5 to 10m² depending on dirt diluted: up to 30m²
Advice: for removing wax layers and the like, we recommend Lithofin WAX-OFF.
For cement residues and rust discolorations on granite, gneiss and similar acid resistant stones, use Lithofin MN Builders’ Clean.
Storage
Keep closed, cool and dry. Not above 25°C.
Shelf life of up to 3 years.
Environmental Protection
Surfactants are biologically degradable in accordance with EU-regulations. Free of phosphates.
Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.
Safety
Ingredients: < 5 % non-ionic and < 5% cationic surfactants, scent (geraniol).
Labeling according to VO(EG) Nr.1272/2008(CLP): Symbol GHS05, Danger
Propylheptanolethoxilate, quaternary C12-14 alkylmethylaminethoxylatmethylchloride
Concentrate causes serious eye damage. Keep out of reach of children. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.
Additional information is listed on the Material Safety Data Sheet.
Packaging
a) 500ml bottle with child-proof cap (10 per box)
b) 1 litre bottle with child-proof cap (12 per box)
c) 5 litre canister (4 per box)

Weight 3.5 kg
Dimensions 0.4 × 0.30 × 0.3 m