KERAPOXY CLEANER

$30.00

Availability: 21 in stock (can be backordered)

KERAPOXY CLEANER

Facebook
Instagram
Email
Twitter
SKU KERAPOXY CLEANER Categories ,

KERAPOXY CLEANER Special cleaning solution for epoxy grout, suitable for cleaning operations after completing laying work and for removing traces and stains of epoxy grout (such as  and KERAPOXY CQ) from the surface of ceramic and glass coverings.
TECHNICAL DATA:
pH of liquid: 12
Waiting time before rinsing: several minutes. In the case of larger residues, leave the solution to react for longer or repeat the cleaning operation. KERAPOXY CLEANER
Storage: 24 months.
Application: by spray.
Consumption: according to requirements.
Packaging:
– 0.75 kg spray bottles;
– 5 kg canisters.

WHERE TO USE
Kerapoxy Cleaner is a detergent used to remove
traces of epoxy grout such as Kerapoxy, Kerapoxy P,
Kerapoxy Design, etc. from ceramic and glass mosaic
coatings.
The main purpose is to facilitate the removal of spray
residues after the final wash with water. It can also be
used to remove any light surface haze that may remain
once the grout has dried i.e. the next day.
Some application examples
• Removal of epoxy grout residues from the surface
of ceramic and glass coatings.
• Cleaning of the tile/mosaic surface of grouted with
Kerapoxy, Kerapoxy, Kerapoxy P, Kerapoxy
Design, etc. after completion of grouting.
TECHNICAL CHARACTERISTICS
Kerapoxy Cleaner is a concentrated liquid detergent
for epoxy grout. Kerapoxy Cleaner is used to remove
residues, stains and marks of epoxy grout without giving
off hazardous fumes.
If used correctly, Kerapoxy Cleaner does not damage
either the tile/mosaic surface (check surface chemical
resistance) or grouted joints.
RECOMMENDATIONS
• Do not use on polished marble or stone.
• Do not use on wood.
• Do not use on methacrylate pools.
• Before using Kerapoxy Cleaner on materials with
an unknown surface resistance, test the product
beforehand to make sure it does not damage the
surface.
• Before using the product, protect all surfaces which
could be damaged in direct contact with the product.
• Not suitable for removing heavy deposits of epoxy
grout and for use with fully cured material. Use
MAPEI Pulicol 2000.
APPLICATION PROCEDURE
Apply Kerapoxy Cleaner on the surface to be cleaned
or on the traces of grout and leave standing for a few
minutes. Then rub the surface with a Scotch-Brite®
pad and rinse thoroughly with water. The product is
particularly efficient on fresh grout. If cleaning is carried
out a few hours after applying the grout, it may be
necessary to leave it standing for longer (at least
15-20 minutes), or repeat the cycle.
PACKAGING
Cleaner is available in 0.75 kg spray bottles
and 5 kg canisters.
STORAGE
Cleaner may be stored for up to 24 months
in its original, sealed packaging in a cool place.
SAFETY INSTRUCTIONS FOR
PREPARATION AND APPLICATION
Cleaner is not considered hazardous
according to current standards and regulations
regarding the classification of mixtures. It is however